ANNA UNIVERSITY BE MECHANICAL ENGINEERING 7TH SEMESTER SYLLABUS 2013
ME2402 COMPUTER INTEGRATED MANUFACTURING SYLLABUS
ME2402 COMPUTER INTEGRATED MANUFACTURING L T P C
3 0 0 3 OBJECTIVE:
- This course will enable the student
- To gain knowledge about the basic fundamental of CAD.
- To gain knowledge on how computers are integrated at various levels of planning
and manufacturing understand computer aided planning and control and computer
monitoring.
UNIT I COMPUTER AIDED DESIGN 9
Concept of CAD as drafting and designing facility, desirable features of CAD package,
drawing features in CAD – Scaling, rotation, translation, editing, dimensioning, labeling,
Zoom, pan, redraw and regenerate, typical CAD command structure, wire frame
modeling, surface modeling and solid modeling (concepts only) in relation to popular
CAD packages.
UNIT II COMPONENTS OF CIM 9
CIM as a concept and a technology, CASA/Sme model of CIM, CIM II, benefits of CIM,
communication matrix in CIM, fundamentals of computer communication in CIM – CIM
data transmission methods – seriel, parallel, asynchronous, synchronous, modulation,
demodulation, simplex and duplex. Types of communication in CIM – point to point
(PTP), star and multiplexing. Computer networking in CIM – the seven layer OSI model,
66
LAN model, MAP model, network topologies – star, ring and bus, advantages of
networks in CIM
UNIT III GROUP TECHNOLOGY AND COMPUTER AIDED PROCESS
PLANNING 9
History Of Group Technology – role of G.T in CAD/CAM Integration – part familiesclassification
and coding – DCLASS and MCLASS and OPTIZ coding systems – facility
design using G.T – benefits of G.T – cellular manufacturing.Process planning - role of
process planning in CAD/CAM Integration – approaches to computer aided process
planning – variant approach and generative approaches – CAPP and CMPP systems.
UNIT IV SHOP FLOOR CONTROL AND INTRODUCTION TO FMS 9
shop floor control – phases – factory data collection system – automatic identification
methods – Bar code technology – automated data collection system.
FMS – components of FMS – types – FMS workstation – material handling and storage
system –FMS layout- computer control systems – applications and benefits.
UNIT V COMPUTER AIDED PLANNING AND CONTROL AND COMPUTER
MONITORING 9
Production planning and control – cost planning and control – inventory management –
material requirements planning (MRP) – shop floor control. Lean and Agile
Manufacturing. Types of production monitoring systems – structure model of
manufacturing – process control and strategies – direct digital control.
TOTAL: 45 PERIODS
TEXT BOOK:
1. Mikell. P. Groover “Automation, Production Systems and Computer Integrated
Manufacturing”, Pearson Education 2001.
REFERENCES:
1. Mikell. P. Groover and Emory Zimmers Jr.,“CAD/CAM”, Prentice hall of India Pvt.
Ltd., 1998.
2. James A. Regh and Henry W. Kreabber, “Computer Integrated Manufacturing”,
Pearson Education second edition, 2005.
3. Chris McMahon and Jimmie Browne, “CAD CAM Principles, Practice and
Manufacturing Management”, Pearson Education second edition, 2005.
4. Ranky, Paul G., “Computer Integrated Manufacturing”, Prentice hall of India Pvt. Ltd.,
2005.
5. Yorem Koren, “ Computer Integrated Manufacturing”, McGraw Hill, 2005.
6. P N Rao, “ CAD/CAM Principles and Applications”, TMH Publications, 2007.
About Anna University
Anna University was established on 4th September 1978 as a unitary type of University. It offers higher education in Engineering, Technology and allied Sciences relevant to the current and projected needs of the society.Besides promoting research and disseminating knowledge gained therefrom, it fosters cooperation between the academic and industrial communities.The University was formed by bringing together and integrating two well-known technical institutions in the city of Madras.
College of Engineering, Guindy (CEG)(1794)
Madras Institute of Technology , Chrompet (MIT)(1949) and three Technological Departments of the University of Madras.
Alagappa College of Technology (ACT)(1944)
School of Architecture and Planning (SAP)(1957)
Situated in the southern part of the city of Madras (Chennai), the University's main campus extends over 100 hectares abutting the Adyar River on the north and Raj Bhavan on the south. The Madras Institute of Technology at Chrompet constitutes the second campus of the University which extends over 20 hectares. Both the campuses have a variety of buildings serving the various needs of the University community. A third campus extending over 80 hectares is located at Taramani near the Instronic campus, Adyar. The Bioprocess Laboratory donated by SPIC is located at present in this campus and a few more centers of advanced studies, like National Institute of Fashion Technology (NIFT), Sugar Research Institute, Mechatronics Institute, Entreprenuership Development Park, and Convention Centre will also be housed there in future.
Since December 2001,it has become a large, highly renowned Affiliated University, having brought into its fold about 426 Self-financing Engineering Colleges six Government Colleges and three Government-aided Engineering colleges located in various parts of Tamilnadu State.
STATUS
The Anna University ,which is of the affiliated type is a member of the Association of Indian Universities, the Association of Commonwealth Universities and Partner of UNESCO International Center for Engineering Education (UICEE). UGC have accredited Anna University with Five Star Status in 2002 which is the highest rating. With proven capabilities both in academic and research areas, Anna University was able to receive this honour for a period of five years for excellence in Technical Education.
Anna University was established on 4th September 1978 as a unitary type of University. It offers higher education in Engineering, Technology and allied Sciences relevant to the current and projected needs of the society.Besides promoting research and disseminating knowledge gained therefrom, it fosters cooperation between the academic and industrial communities.The University was formed by bringing together and integrating two well-known technical institutions in the city of Madras.
College of Engineering, Guindy (CEG)(1794)
Madras Institute of Technology , Chrompet (MIT)(1949) and three Technological Departments of the University of Madras.
Alagappa College of Technology (ACT)(1944)
School of Architecture and Planning (SAP)(1957)
Situated in the southern part of the city of Madras (Chennai), the University's main campus extends over 100 hectares abutting the Adyar River on the north and Raj Bhavan on the south. The Madras Institute of Technology at Chrompet constitutes the second campus of the University which extends over 20 hectares. Both the campuses have a variety of buildings serving the various needs of the University community. A third campus extending over 80 hectares is located at Taramani near the Instronic campus, Adyar. The Bioprocess Laboratory donated by SPIC is located at present in this campus and a few more centers of advanced studies, like National Institute of Fashion Technology (NIFT), Sugar Research Institute, Mechatronics Institute, Entreprenuership Development Park, and Convention Centre will also be housed there in future.
Since December 2001,it has become a large, highly renowned Affiliated University, having brought into its fold about 426 Self-financing Engineering Colleges six Government Colleges and three Government-aided Engineering colleges located in various parts of Tamilnadu State.
STATUS
The Anna University ,which is of the affiliated type is a member of the Association of Indian Universities, the Association of Commonwealth Universities and Partner of UNESCO International Center for Engineering Education (UICEE). UGC have accredited Anna University with Five Star Status in 2002 which is the highest rating. With proven capabilities both in academic and research areas, Anna University was able to receive this honour for a period of five years for excellence in Technical Education.
Check The Syllabus
ME 2401 Mechatronics
ME 2402 Computer Integrated Manufacturing
ME 2403 Power Plant Engineering
ME 2027 Process Planning & Cost Estimation
ME 2029 Design of Jigs, Fixtures & Press Tools
ME 2030 Composite Materials
ME 2028 Robotics
ME 2031 Thermal Turbo machines
ME 2032 Computational Fluid Dynamics
ME 2034 Nuclear Engineering
___________________________________________________
Search Key Words
anna university be mechanical engineering 7th semester syllabus regulation 2010-2014,
anna university be mechanical engineering 7th semester syllabus,
anna univ 7th sem syllabus 2013,
govt university syllabus 2013,
anna university 7th semester syllabus 2013,
mechanical engineering 7th semester syllabus download,
ME2402 computer integrated manufacturing 2013
ME2402 CIM 2013 syllabus 2013
ME2402 computer integrated manufacturing 2013
ME2402 CIM 2013 syllabus 2013
